Entering Bill Data
One representative bill, read for you or typed in:
- Read or typedrop a PDF, JPG or PNG bill (Pro plan and free trial), or type it in as Flat Rate or Time-of-Use.
- Check and confirmclear each item in the check panel, then Confirm Bill; Continue waits for it.
- Charges on the Billevery line by section, ex GST, edited in place, with the printed total kept on read lines.
- Tariffretail windows by season with weekday and weekend rows; Match Bill Timings suggests timings, never prices.
- Demand chargeseach line keeps its billed total, measured as a monthly peak, a 12-month ratchet or some months only.
- Network Tariff Reviewon Recommendation: where the site sits on its network tariff after install, and what else it could be on.
Type the printed total to check the lines add up. If the totals are far apart, a rate or a unit is wrong.
Bill Data is where the site's tariff goes in. Everything downstream prices against it: savings, payback and the demand reduction a battery can earn. You enter one representative bill. The fastest way is to drop the bill and let Amperage read it, then check what it found and confirm it.
Get the Bill In
An empty Bill Data page offers two ways in. Drop the customer's bill on the drop zone (a PDF, or a JPG or PNG photo), or type it in by picking how the bill charges for energy:
- Flat Rate: one price per kWh and a daily supply charge. Most small sites.
- Time-of-Use: peak, off-peak and sometimes shoulder rates, with network, market and demand charges. Most commercial bills.
While a bill is being read, the page shows each step (reading the pages, finding the bill period and totals, reading each charge line, adding up against the printed total). It usually takes 30 to 60 seconds, and you can leave the page while it runs. If one PDF holds several bills, Amperage lists them and you pick the one to model; a recent, full month gives the best estimate. Reading a bill is on the Pro plan, and available during the free trial. Every line can also be typed by hand.
The Bill Card
The Bill Card at the top sums the bill up in five figures: Annual bill, Monthly average, Usage a year, Blended retail and Against the bill. The annual figures are estimated from the bill's own days, and every figure is ex GST. Below them sit the retailer, the bill period, the days in the bill and the GST setting, all editable in place. A quarterly bill can carry its real day count, such as 92.
The card's menu holds the less common settings:
- Bill values include GST: for a bill whose figures include GST. Rates stay as you typed them, and line totals and every figure are shown ex GST.
- Change to Flat Rate or Change to Time-of-Use: switches the bill type. It asks first, and the bill period stays.
- Bill Structure: whether network charges are one set, split by summer and winter, or shown as DUoS and TUoS; whether demand has one rate or summer and winter rates; and whether usage comes from the bill or from the Consumption stage (rates only).
- Clear Bill Data: removes every line, the windows and the read.
Replace Bill reads a new PDF over the current one. If you have edited the bill since it was read, it asks first, because a new read replaces those edits.
Check and Confirm
After a read, the Check the Extracted Bill panel lists anything worth a look before the bill is used: a line that no longer matches what the bill printed, a demand rate that does not match its line total, an empty export tariff or a network tariff still to pick. Each item names its charge and carries the fix: go to the line, restore the rate the bill printed, enter a rate or mark it None on This Bill, or pick the tariff. Our total from the lines is set against the total printed on the bill, and any gap is explained line by line.
Confirm Bill unlocks once every item is cleared, and Continue waits for it. Once confirmed, the Bill Card says what changes downstream, such as the annual usage the Consumption stage will scale its load profile to. A bill you type in gets a lighter Compare With the Bill panel instead: type the printed total to check the lines add up, and see which sections are still to enter, each with Add Line and None on This Bill. Nothing there blocks Continue.
Charges on the Bill
The ledger lists every charge on the bill in sections: Retail Energy, Environmental Schemes, Network Usage, Network Demand, Market Charges, Daily Charges and Other Charges, then the Export Tariff (the feed-in rate for solar exports, not part of the bill total). Unit prices are in c/kWh and totals in dollars ex GST. Each section shows its share of the bill and can be collapsed.
Edit a usage, rate or loss factor in place and the line total follows. Add a line the read missed, remove one that does not belong, or mark a section None when the bill has no such charge. A read line remembers the total the bill printed for it, so a line that no longer matches the bill is flagged.
Demand Charges
Each line in Network Demand shows the kVA (or kW), the rate, the days and the total. A demand line keeps the total the bill printed; when the rate times the demand and days is more than 2% off it, the check panel offers Use Rate From Total. Edit Window sets the hours each charge is measured in and how it is measured:
- Monthly peak: the highest demand in each bill month, so it resets every bill.
- 12-month ratchet: the highest demand over the last 12 months, so one spike sets a year of bills.
- Some months only: charged only in the months you pick.
On many commercial sites, demand charges are where a battery earns most of its keep.
Tariff
The Tariff card states the bill's structure in one sentence and draws its time-of-use windows. Peak, shoulder and off-peak rates only mean something once the hours are set, and retail and network windows each have their own schedule.
- Retail Windows. Edit opens the windows editor: pick a period, then click or drag across the hour cells. Windows can be the same all year, split into summer and winter, or set by month, and each season has its own weekday and weekend rows. Match Bill Timings ranks common retail timing patterns against the periods on the bill and suggests the closest. Picking one fills in the windows only; your rates stay the ones from the bill.
- Network Tariff. Pick Tariff lists the network's published tariffs, with the code on the bill marked. Loading one brings in its windows and rates, which you can then adjust. The tag says how the tariff was set: a match from the read, picked by hand, or confirmed with the bill.
If interval data has been uploaded, the card compares it with the bill. When the meter's windows disagree with the retail windows, it says by how many hours and offers Use Interval Windows or Keep Bill Windows. When the bill has no time-of-use rates but the meter shows time-of-use windows, it offers to set them.
Where the Money Goes
This card splits the bill by category (retail energy, network usage, network demand, environmental, market, daily and fixed, other), for this bill or a year, with the usage, the blended retail price and the peak to off-peak spread. These are the same ex GST figures every later stage uses. Until the bill has charge lines, the card says what it is waiting for.
After the Recommendation: the Network Tariff
Once an Analysis has run, the Recommendation page shows a Network Tariff Review card. The card shows where the site sits on its network tariff after the system goes in, and what else it could be on. Each alternative is marked as one the customer can elect, one the network assigns, unverified, or not eligible, with the network cost today and after install. The figures are network charges only, worked out from the network's published prices on the site's metered usage. They are indicative. Any switch goes through the retailer and the network. The card prices your pick: the chip in its header names the system the figures are for, and a new pick is priced again within a few seconds.